How to use the Dark Knight SPIRIT Wax Vaporizer

STEPS FOR USE

Using the DarkKnight SPIRIT Vaporizer is extremely simple.

1 – Disassemble the glass body and nozzle from the unit’s main body

2 – Fill up the glass body (glass filter column) half way with water

3 – Add your media of choice to the unit’s atomizer / heating element with the tool included

4 – Re-insert the glass body into the unit’s main body until it is tightly secured. Assemble the glass nozzle to the glass body

5 – Press the unit’s activation button 5 times withing 2 seconds to turn the unit ON. The unit’s Red and Blue LEDs should light up brightly at this time.

6 – Press and hold the units ON button to vaporizer your media.

Note: The unit has an overheat protection function built in. This will automatically de-activate the unit from heating its atomizer if the atomizer is kept ON continuously for more than 15 seconds.

7 – Press the unit’s activation button 5 times withing 2 seconds once again to turn the unit OFF. The unit’s LEDs should light up brightly and remain off to indicate the unit has been shut down.

VAPEPENSSStore

Leave a Reply

Your email address will not be published. Required fields are marked *